A new chapter in rebar processing has begun. We launched two new machines at BAUMA CONEXPO INDIA 2026. Both are built for construction work that demands precision, productivity and dependable performance.
The launch covers a bar bending machine and a bar cutting machine. Both belong to our new Taurus series. Both are built on our gear technology, including a compact barbending gearbox that delivers high torque.
This post explains what we launched, what makes each machine different, and how you can reach our team.
Where We Launched the Taurus Series
BAUMA CONEXPO INDIA 2026 took place at India Expo Centre, Greater Noida. It is an international trade fair for construction machinery, building material machines, mining machines and construction vehicles. The fair returns every two years, and this was its eighth edition.
We presented the Taurus series at Hall 10, Stall G91. Visitors could see the Taurus TGB 52 Bar Bending Machine and the Taurus TGC 52 Bar Cutting Machine in action. Both machines are CE certified products.
The fair draws buyers from construction, building materials and mining. That made it the right stage for a launch aimed at rebar processing.
What Is the Taurus Series
Taurus is our new brand of rebar processing machines. It brings bending and cutting together under one range. Each range comes in three models.
The bending range includes the TGB 42, TGB 52 and TGB 55. The cutting range includes the TGC 42, TGC 52 and TGC 55. Our launch stall focused on the TGB 52 and the TGC 52.
Model sizes follow bar diameter. The TGB 42 bends bars up to 32 mm. The TGB 55 handles bars up to 40 mm. The TGC 42 cuts bars up to 36 mm, while the TGC 55 cuts up to 40 mm.
The series carries a simple promise. Stronger build, precise work and maximum productivity. Every design choice supports that promise.
Why We Built These Machines
We have more than 25 years of experience in gearbox manufacturing. In rebar machines, the gearbox decides how much torque reaches the bar. It also decides how long the machine lasts.
Many bending machines depend on external belts and separate drive parts. Each part adds a wear point. Belt failure is a common cause of downtime on site.
We wanted a simpler machine. So we built the TGB 52 with no external belt. This means fewer breakdowns and lower maintenance for the user.
Taurus TGB 52 Bar Bending Machine Highlights
The TGB 52 is a bar bending machine made for daily site and yard work. It bends bars up to 36 mm in diameter. Its motor is rated at 5 HP. Here are the main features.
- Integrated planetary barbending gearbox with high torque output
- Lowest height design in the market for comfortable operation
- No external belt, so fewer breakdowns and lower maintenance
- Built-in tool storage shelf for better organization
- Robust body with a powder-coated finish
- PLC-based safety control with a tested electrical panel
- Three preset bending positions for faster production
- Energy-efficient IE2 motor for continuous operation
- 18 months warranty
The control panel keeps things simple. It has an angle selector, power, forward, reverse and an emergency stop. Operators can find every control at a glance.
Taurus TGC 52 Bar Cutting Machine Highlights
The TGC 52 is our bar cutting machine for tough sections. It cuts bars up to 40 mm in diameter. Its motor is rated at 5 HP or 3.7 kW. It carries the following features.
- Leak-proof gearbox for long life and maintenance-free operation
- Ergonomic hand and foot lever to reduce operator fatigue
- Wheel-mounted design for easy movement and portability
- Impact resistance spring mechanism to avoid accidents
- Dynamically balanced flywheel for reduced vibration and noise
- Guide rollers for smooth bar handling and marking
- Protective guard cover for the motor, flywheel and components
- 2 years warranty
These features work together. The result is smooth cutting, steady output and a safer working area.
Safety Built Into the Design
Rebar work involves heavy loads and sharp edges. Safety cannot be an afterthought. We built protection into both machines from the start.
The TGB 52 has a PLC-based safety control and a tested electrical panel. An emergency stop sits on the front panel. The TGC 52 has an impact resistance spring mechanism and a guard cover over moving parts. Its hand and foot lever also reduce operator fatigue during long shifts.
Why the Barbending Gearbox Matters
A barbending gearbox turns fast motor speed into slow and powerful rotation at the bend wheel. On the TGB 52, the bend wheel turns at 9.4 RPM. Steel bars resist bending, so torque decides how well the machine performs.
We chose a planetary design for this job. A planetary layout shares the load across several planet gears. It gives high torque in a compact body. It also copes well with the sudden load at the start of a bend. You can read more in our guide to the bar bending machine gearbox.
Because the gearbox is integrated into the machine, the drive stays compact. There is no belt to slip or snap. This keeps maintenance low and uptime high.
We have designed planetary gearboxes for bending machines for years. Our engineers explain the thinking in a post on the design and development of planetary gearboxes for bar bending machines.
Built for Real Construction Work
Every reinforced concrete structure depends on cut and bent steel bars. Buildings, bridges, flyovers and foundations all need rebar in exact shapes and lengths. Fabrication yards and precast units process bars all day.
A barbending gearbox that runs steady helps these teams keep output consistent. A precise cutting machine keeps bar lengths accurate and reduces waste. Together, the TGB 52 and TGC 52 cover the two core steps of rebar processing. New to this equipment? Read our explainer on how a bar bending machine works.
Both machines are also CE certified. The certification supports buyers who need equipment that meets recognized safety and quality expectations.
Warranty and Support
We stand behind our machines. The TGB 52 comes with an 18 months warranty. The TGC 52 comes with a 2 years warranty.
Our team can guide you on model selection, bar sizes and tensile strength. We also share past work in our success stories so you can see how our gearboxes perform in the field. We can also share capacity charts for each model so you can compare bar counts by diameter.
What the Launch Means for Our Customers
Until now, most buyers knew us as a gearbox maker. The Taurus series takes that experience into complete machines. Contractors now have one source for both bending and cutting equipment.
The three model sizes in each range let buyers match the machine to their bar diameter and tensile strength. That keeps the investment right sized for the work.
Conclusion
The Taurus TGB 52 and TGC 52 mark a strong step in rebar processing. They combine a compact barbending gearbox, safer controls and a robust build. They are made for the demands of modern construction.
Top Gear Corporation Limited has built gearboxes for more than 25 years. The Taurus series carries that experience into complete bar bending and bar cutting machines.
Frequently Asked Questions
What is the Taurus series?
It is our new range of bar bending and bar cutting machines. Each range has three models.
Where was the Taurus series launched?
We launched it at BAUMA CONEXPO INDIA 2026, Hall 10, Stall G91, India Expo Centre, Greater Noida.
Which machines were showcased at the launch?
We showcased the Taurus TGB 52 Bar Bending Machine and the Taurus TGC 52 Bar Cutting Machine.
What is a barbending gearbox?
It is the gear unit that turns fast motor speed into slow, high torque rotation at the bend wheel.
Why does the TGB 52 use a planetary gearbox?
A planetary layout shares load across several gears. It gives high torque in a compact body.
Are the new machines CE certified?
Yes. Both the TGB 52 and the TGC 52 are CE certified products.
What warranty comes with the machines?
The TGB 52 has an 18 months warranty. The TGC 52 has a 2 years warranty.
Does the TGB 52 use an external belt?
No. The design has no external belt, which means fewer breakdowns and lower maintenance.
